THERMAL ANALYSIS OF A PENTAGONAL SOLAR AIR COLLECTOR
Abstract
In this paper, a pentagonal shaped Solar Air Collector (SAC) is proposed. The pentagon design is used to improve the incident radiation angle. The SAC is tested in University of Duhok campus, Kurdistan Region, Iraq in a stand facing south. The absorber made from the sandwich steel panel plate with an area of 0.9*1.5 m2 and thickness of 0.4 mm. The collector is covered with a Plexiglas of thickness 5 mm. The effect of the air flow channel on the collector efficiency is studied. Experimental studies are carried out for different tilt angles to show the improvement in the collector performance. The collector is tested for four sunny days in the same atmospheric conditions in December as the worst month. The results demonstrate that the optimum tilt angle of the day will substantially enhance the thermal efficiency comparing to latitude tilt angle. In addition, the proposed SAC with closed channel and open channel shows different performance during the day time.
Downloads
References
Catton, I. (1978). Natural Convection in Enclosures. Paper presented at the Sixth International Heat Transfer (pp.13–31). Toronto: Canada, 7-11 August.
Cengel, Y., Turner, R., & Cimbala, J. (2016). Fundamentals of Thermal-Fluid Sciences: Mc Graw Hill.
Chabane, F., Moummi, N., & Benramache, S. (2014). Experimental study of heat transfer and thermal performance with longitudinal fins of solar air heater. Journal of Advanced Research, 5(2), 183-192.
Chabane, F., Moummi, N., Benramache, S., Bensahal, D., & Belahssen, O. (2013). Collector Efficiency by Single Pass of Solar Air Heaters with and without Using Fins. [Design of experiments, efficiency, solar energy, fins, temperature, heat transfer, ambient temperature.]. 2013, 17(3), 13.
Deng, J., Xu, Y., & Yang, X. (2015). A dynamic thermal performance model for flat-plate solar collectors based on the thermal inertia correction of the steady-state test method. Renewable Energy, 76, 679-686.
Duffie, J. A., & Beckman, W. A. (2013). Solar Engineering of thermal processes (4th ed.). NewJersey: John Wiley & Sons.
Hematian, A., Ajabshirchi, Y., & Bakhtiari, A. A. (2012). Experimental Analysis of Flat Plate Solar Air Collector Efficiency. [Flat Plate Collector, Solar Radiation, Efficiency]. Indian Journal of Science and Technology, 5(8).
Hu, J., Sun, X., Xu, J., & Li, Z. (2013). Numerical analysis of mechanical ventilation solar air collector with internal baffles. Energy and Buildings, 62, 230-238.
Hung, T.-C., Huang, T.-J., Lee, D.-S., Lin, C.-H., Pei, B.-S., & Li, Z.-Y. (2017). Numerical analysis and experimental validation of heat transfer characteristic for flat-plate solar air collector. Applied Thermal Engineering, 111, 1025-1038.
Jack, P. H. (2010). Heat Transfer (10th ed.): McGraw-Hill.
Karmare, S. V., & Tikekar, A. N. (2010). Analysis of fluid flow and heat transfer in a rib grit roughened surface solar air heater using CFD. Solar Energy, 84(3), 409-417.
Lee, D.-S., Hung, T.-C., Lin, J.-R., & Zhao, J. (2015). Experimental investigations on solar chimney for optimal heat collection to be utilized in organic Rankine cycle. Applied Energy, 154, 651-662.
Pandey, K. M., & Chaurasiya, R. (2017). A review on analysis and development of solar flat plate collector. Renewable and Sustainable Energy Reviews, 67, 641-650.
Varol, Y., & Oztop, H. F. (2008). A comparative numerical study on natural convection in inclined wavy and flat-plate solar collectors. Building and Environment, 43(9), 1535-1544
It is the policy of the Journal of Duhok University to own the copyright of the technical contributions. It publishes and facilitates the appropriate re-utilize of the published materials by others. Photocopying is permitted with credit and referring to the source for individuals use.
Copyright © 2017. All Rights Reserved.