INTEGRATING A SET OF LEAN CONSTRUCTION TECHNOLOGY TO BUILDING INFORMATION MODELLING

  • IHSAN ALI HUSSEIN AL-SARRAY
  • YOUSIF SALAM SAEED
  • AHMED ADIL NAJI
Keywords: Lean construction; Building Information Modeling; Integrating BIM to Lean construction techniques.

Abstract

Technology has a great impact in managing and implementing highly desired complicate design
construction projects, this paper attempted to address a set of synergies between Lean Construction
Technologies (LCTs) and Building Information Modeling (BIM) to provide the researchers with a fully
comprehensive idea about the impotence of the integration. Through reviewing and presenting of the
published papers which presented the integration of one or two lean technology concepts integrated to
building information modeling in accordance to the studied cases in one paper, this paper will provide the
researcher, developer, and constructing companies with many studied cases presented some of the most
important Lean technologies in this field. These technologies are; Last Planer System (LPS); KanBIM;
VisiLean; Just-In-Time (JIT); Value Stream Mapping (VSM). Also, this paper suggested the possibility of
integrating a 5S technology to BIM for a future study.

Downloads

Download data is not yet available.

References

Ajaya R., Sridharb M.B. (2016). INCORPORATION
OF 5S METHODOLOGY IN
CONSTRUCTION PRACTICES Int. J. Chem.
Sci.: 14(S1), 127-134.
Allan F. O. (2016). Interaction between Lean
Construction and BIM. Master's thesis.
[Online] Available:
https://www.diva-portal.org/smash/get/diva2:1
048993/FULLTEXT01.pdf
Barathwaj R., Singh R.V., Gunarani G. I. (2017).
Lean Construction: Value Stream Mapping for
Residentials Construction. IJCIET, 8,
1072-1086.
Dave, B., Koskela, L., Kiviniemi, A., Owen, R.,and
Tzortzopoulos, P. (2013). Implementing Lean
in construction: Lean construction and BIM.
London, UK: CIRIA.
Eroshkin S.Y., Kallaur G.Y., Papikian L.M. (2016)
Lean Construction, and BIM: Complementing
Each Other for Better Project Management.
Review of Business and Economic Studies.
4(4):17-22.
Geetanjali Ningappa. (2011). “Use of Lean and
Building Information Modeling (BIM) in the
Construction Process; Does BIM make it
Leaner.” (Master's thesis).
Gray C., Larson E. (2011), Project Management,
McGraw-Hill/Irwin, Boston, MA, USA, 5th
edition,
Manisha G. (2016). INTEGRATION OF BUILDING
INFORMATION MODELING (BIM) AND
PREFABRICATION: A BOOST TO LEAN
PRINCIPLE ENVIRONMENT. Master's
thesis submitted to the North Dakota State
University of Agriculture and Applied Science.
[Online] Available:
https://pdfs.semanticscholar.org/9c7c/fba1ca52
12880747cb49681f963316a4b893.pdf"9
McCook K., Dodge D. (2015). Analytics (2010-16)
Outlook for, U.S. Construction Presentation,
Dodge, Auburn Hills, MI, USA,
Ocheoha I. A., Moselhi O. (2013). Impact of Building
Information Modeling on Just-In-Time
Material Delivery, ISARC 2013 - 30th Int.
Symp. Autom. Robot. Constr. Mining, Held
Conjunction with 23rd World Min. Congr.
793–801 (2013)
Payam F. L. (2019). BIM in Construction
Management: Leaning the Design-Bid-Build
(DBB) Project Delivery System by Using BIM
in Design Phase. Master's thesis. [Online]
Available:
https://webthesis.biblio.polito.it/11622/"/
Sacks R, Koskela L, Dave BA, Owen R. (2010).
Interaction of lean and building information
modeling in construction. J Constr Eng
Manage. 136(9), 968–980. Sacks, R., Barak, R., Belaciano, B., Gurevich, U. &
Pikas, E. (2011), Field Tests of the Kanbim™
Lean Production Management System' In:
Rooke, J. & Dave, B., 19th Annual Conference
of the International Group for Lean
Construction. Lima, Peru, 13-15 Jul 2011.
Sacks, R.; Radosavljevic, M.; Barak, R. (2010).
Requirements for building information
modeling based lean production management
systems for construction. Autom Constr. 19,
641–655.
Sajedeh, M., Fleming, A., Talebi, S., and Underwood,
J., 2016. Development of an Experimental
Waste Framework Based on Bim /Lean
Concept in Construction Design. In 24th
Annual Conference of the International Group
for Lean Construction
Suchun Y. (2019). APPLICATION OF BIM DURING
LEAN CONSTRUCTION OF HIGH-RISE
BUILDINGS. THE CIVIL ENGINEERING
JOURNAL, 27(3).
Vidhate, T., & Salunkhe, A. A. (2018). A general
overview of lean management in the
construction industry. International Journal of
Engineering and Technology (IRJET), 5(7),
1999-2004.
Zhang X, Azhar S, Nadeem A, Khalfan M. (2018).
Using building information modeling to
achieve lean principles by improving the
efficiency of work teams. Int J ConstrManage.
18(4),293–300.
Phuong N., Reza A. (2019), Synergistic Effect of
Integrated Project Delivery, Lean Construction,
and Building Information Modeling on Project
Performance Measures: A Quantitative and
Qualitative. Hindawi, [Online] Available:
https://doi.org/10.1155/2019/1267048
Xingchen Z. (2019). Integrating Lean Construction,
BIM, and Quality: A New Paradigm for the
Improvement of Chinese Construction Quality.
Doctoral dissertation. [Online] Available:
https://researchportal.bath.ac.uk/en/studentThe
ses/integrating-lean-construction-bim-and-qual
ity-a-new-paradigm-for
Published
2020-12-28
How to Cite
AL-SARRAY, I. A. H., SAEED, Y. S., & NAJI, A. A. (2020). INTEGRATING A SET OF LEAN CONSTRUCTION TECHNOLOGY TO BUILDING INFORMATION MODELLING. Journal of Duhok University, 23(2), 92-103. Retrieved from https://journal.uod.ac/index.php/uodjournal/article/view/911