EXPERIMENTAL INVESTIGATION OF FLAT PLATE COLLECTOR SYSTEM PERFORMANCE USING GALVANIZED STEEL ABSORBER IN DUHOK CLIMATE
Abstract
The present work includes the design and fabrication of the flat plate solar collector system. The performance of the system is investigated experimentally using galvanized steel sheet with 0.4mm thickness as an absorber plate with black coating, the collector area is 0.54 m2. The test is conducted in Iraq, Kurdistan region, Duhok city on January 10, 2019, for five hours. The collector efficiency is satisfactory as compared with previous study. The useful heat gain and efficiency of collector have been calculated from the collected data. The results display that there are many factors and parameters such as wind speed, collector heat removal factor, heat losses coefficient and transmission-absorption product affected on collector efficiency.
Downloads
References
Dabhane, B. P., & Adhau, S. P. (2014). Experimental Analysis of Flat Plate Collector Solar Water Heater. International Journal of Science and Engineering Investigations, 3(24), 4–12.
Ekramian, E., Etemad, S. G., & Haghshenasfard, M. (2014). Numerical Analysis of Heat Transfer Performance of Flat Plate Solar Collectors. Journal of Fluid Flow, Heat and Mass Transfer, 1, 38–42.
Guf’ta, N. M. N. and J., & P. (1989). Studies On Gap Spacing Between Absorber And Cover Glazing In Flat Plate Solar Collectors. International Journal of Energy Research, 13, 727–732.
Hamood, H. S., Salim, B. M., & Abdulrazzaq, N. M. (2014). Theoratical Analysis Of Flat Plate Solar Collector Placed In Mosul City By Using Different Absorbing Materials And Fluids. Kufa Journal of Engineering, 6(2), 1–12.
Holman, P. J. (2001). Chapter 3 : Analysis of experimental data [extract]. In L. Buszek (Ed.), Experimental methods for engineers (pp. 48–60).
Ihaddadene, N., Ihaddadene, R., & Mahdi, A. (2014). Effect of glazing number on the performance of a solar thermal collector. IREC 2014 - 5th International Renewable Energy Congress, (Et 200), 0–5.
Jalaluddin, J., Arif, E., & Tarakka, R. (2016). Experimental Study of an SWH System with V-Shaped Plate. Journal of Engineering and Technological Sciences, 48(2), 207–217.
John A. Duffie, W. A. B. (2013). Wiley: Solar Engineering of Thermal Processes, 4th Edition - John A. Duffie, William A. Beckman.
Khadim, I. J., Mahdi, E. J., & Ubaid, A. H. (2014). Determining Tilt Angle for Fixed Solar Panel Tosites of Iraq’s Provinces by Using the Programs on NASA and Google Earth Websites. Engineering & Technical Journal, 32(3), 3–4.
Khedher, N. Ben. (2018). Experimental Evaluation of a Flat Plate Solar Collector Under Hail City Climate. 8(2), 2750–2754.
It is the policy of the Journal of Duhok University to own the copyright of the technical contributions. It publishes and facilitates the appropriate re-utilize of the published materials by others. Photocopying is permitted with credit and referring to the source for individuals use.
Copyright © 2017. All Rights Reserved.